Specifications

ManualsBrandsz-cyber ManualsComputer equipmentZing 7 Seven

Quick Installation

Reference Card

Zling HCF Modem

PCI PnP Fax Modem

With Voice Speakerphone Functions

Software Upgradeable

56,000

bps Data Modem (DUAL MODE) Supporting both V.92 and

V.90

14,400 bps Send & Receive Fax

Supports speeds up to 115,200 bps

Full Featured Voice Messaging

Speakerphone Functions

V.42 Error Correction and

V.42bis 4-to-1 Data Compression

Capable of receiving at up to 56kbps, and send at up to 31.2 kbps. Due to FCC regulations on power output, receiving speeds

limited to 53kbps. Actual speed vary. Requires compatible phone line and server equipment. Complies with both the v.90 56k

standard and K56Flex technology protocols

Version V1.1

Summary of content (10 pages)

PAGE 1
Quick Installation Reference Card Zling HCF Modem PCI PnP Fax Modem With Voice Speakerphone Functions þ þ þ þ þ þ þ Software Upgradeable 56,000* bps Data Modem (DUAL MODE) Supporting both V.92 and V.90 14,400 bps Send & Receive Fax Supports speeds up to 115,200 bps Full Featured Voice Messaging Speakerphone Functions V.42 Error Correction and V.42bis 4-to-1 Data Compression Capable of receiving at up to 56kbps, and send at up to 31.2 kbps.
PAGE 2
If you have never installed an add-in board in your computer before, please follow the instructions in this section carefully. You may also want to refer to the Installation Chapter in your manual. What is V.92*? l Modem on-hold It allows you to take incoming call while you are online by putting the modem on hold. This feature requires a call waiting service to be provided by your local phone company.
PAGE 3
6. 7. 8. the modem from the static-shielded bag. Press the board firmly into the slot ensuring that the gold tabs on the fax/modem are aligned with the connectors in the slot. Insert the screw and tighten slightly. Check to ensure that the telephone jacks in the back of the modem are unobstructed. If so, then tighten the screw securely. Replace the computer cover.
PAGE 4
Windows Vista (32-bit) driver Installation 1. REMOVE any CD driver from the CDROM 2. Windows Vista automatically detects a new MODEM is inserted into the system. Select “Locate and install driver software (recommended)” 3. Click “Continue” button in “User Account Control” window 4. Windows want to search driver online, search online” please select “Don’t 5. Please select “I don’t have the disc.
PAGE 5
6. Select “Browse my computer for driver software (advanced) 7. Insert the Communication CD driver in the CDROM Press “Browse” button and select path “d:\Zling_HCF\Vista_32bit” where d: is the driver letter of the CD/DVD rom drive 8. Select “Install this driver software anyway” 9. Now, the Zling HCF Modem driver is installed successfully.
PAGE 6
Windows XP Driver Installation (V.90) Since Windows XP will automatically install the generic modem driver, you must go to Control Panel>System>Hardware>Device Manager. 1. Right click the “Generic 56k HCF Data/Fax modem” and select update driver 2. Select “No, not this time” and click “Next” 3. Select “Install from a list or specific location (Advanced)” and then click “Next” button 4. Select “Don’t search.
PAGE 7
5. You will find the generic driver on the list. Click “Have Disk…” to find the driver from the CD-ROM. Then click “Next” button 6. Click “Browse”. Search driver from your CD-ROM drive and select D:\Zling_HCF\V.90\Win2K_XP to open the “cxt1056k.INF” file. (Note: Replace D: with the drive letter of your CD-ROM drive if necessary.) 7. Select “Z-Cyber Zling HCF Modem” and click “Next”. Then, click “Continue Anyway” to install.
PAGE 8
. Click “Finish” to complete the installation, and click “Yes” to restart your computer. Windows 95 / 98 / 98SE / ME / 2000 / XP 64-bit / Vista 64-bit Driver Installation All steps are much easier than Windows XP Driver Installation. computer detects a new hardware: Choose specific locations for the drivers as follows once your For V.90 Windows 95 / 98/98SE Windows ME Windows 2000/XP (32-bit) Windows XP (64-bit) Vista (32-bit) Vista (64-bit) D:\Zling_HCF \V.90\Win95_98 D:\Zling_HCF \V.
PAGE 9
NetWaiting Installation (Call Waiting feature only works under V.92) 1. Search CD-ROM from your CD-ROM drive and select D:\ Zling_HCF \Netwaiting1.05 (Note: Replace D: with the drive letter of your CD-ROM drive if necessary.). Run the “Setup.exe” to start the installation. 2. Click “Yes” for License Agreement. Under “Choose Destination Location”, click “Next” to continue. 3. Click “Next” button under “Select Program Folder”, and then click “Finish” to complete the installation.
PAGE 10
Common Problems and Their Solutions Problem: Modem answers incoming calls and then returns to the on-hook condition, disconnecting the caller. This occurs most often when connecting to a UNIX system. In most case, the host does not prefer to see any result or command echo codes. If this is the case, the codes can be disabled by adding E0 Q1 to the modem configuration string. Problem: No echo from modem This is normally caused by an I/O address or IRQ conflict.