User guide

7
General care
The ZScanner 700 contains optical precision parts and must be handled with
care to avoid damage to the components or the calibration system. For
transportation, the system must be placed in the carry-on case provided with the
kit. The system must be stored in a dry, dust-free place and kept at ambient
temperature.
The scanner must be kept on its support or in its carrying case when not
used.
Clean the interference filters with a clean and dry cloth.
Never open any of the system’s components. By doing so, the user may
inadvertently damage the system and the ZScanner 700 will have to be
recalibrated. Only Z Corporation staff or authorized technicians are qualified to
work on the scanner. No maintenance is required by the end user. If the system
shows troubles or dysfunctions, it must be sent to Z Corporation or to an
authorized reseller.
Sca
nner Manipulation
The first step when it comes to scanning with the ZScanner 700 is to be able to
connect the system properly. Also, in order to avoid recalibration, the ZScanner
700 should always be properly stored in its case.