User guide

35
Scanning procedures
Object preparation
Applying targets
It is essential to prepare the object prior to scanning. Reflective targets must be
affixed randomly on the object with a minimal distance of 20 mm (0.75 in)
between them. For flat surfaces or with a slight curvature, the distance between
each target can reach 100 mm (4 in). Those targets will enable the system to
position itself in space. Positioning targets must be applied on plane surfaces
keeping at least 12 mm from the edges on every side.
Here is an example of proper target distribution.
Figure 3.1 - Proper target distribution
Figure 3.2 - Improper targets distributions