User guide

12
ZScan
ZScan minimal required configuration
 Processor with HT (Hyper Threading) or Dual Core technology (Dual Core
recommended).
 Dedicated Graphical card with at least 128 Mb on board memory.
 Windows XP 32 bits operating system, or Windows Vista x32.
 1 GB RAM (2 GB recommended).
 CD-Rom drive.
 PCMCIA slot
 Access to a user account with administrator’s privileges for installation
only.
System Installation / Start-up
The cables provided with the system are:
 A FireWire cable (IEEE 1394) to connect the scanner to the computer
 A power supply cable for the PCMCIA card (scanner)
 Firewire PCMCIA card
If you did not purchase the computer from Z Corporation or if you are using
a different computer than the one provided with the system, you need to
install ZScan BEFORE connecting the sensor cables. Please ensure that
your laptop model is approved by Z Corporation.
Follow the indications to connect the cables to the system:
1. Insert the Firewire PCMCIA card into the laptop computer’s PCMCIA bay
(location may vary depending on the computer).
2. Push firmly to make sure that the card is inserted.
3. Connect the power supply to the PCMCIA card
4. Connect the power supply to the power source (use adapter as needed).
5. Connect the Firewire (IEEE1394) cable to the scanner and to the PCMCIA
card.