Hardware manual

ZPrinter® 650 Hardware Manual Troubleshooting the ZPrinter 650

10/21/08

7.6 Motion Errors - Slow Axis

There are a number of Error Codes the printer may report that all relate to the Slow Axis, and that all

share a common set of solutions.

Error Codes covered in this section:

• Error 2301:0 Motors Not Rezeroed

• Error 2303:0 x Axis Pos Error

• Error 2305:0 x Axis Settle Error

• Error 2400:0 x Axis Seek Error

• Error 3011 System Error

• Error 3013 Sequencer Timeout

• Error 43000 Sequencer Timeout

For more detailed information on what these errors mean, see Section 7.13, ’Error Codes and Messages -

Background Details’.

How to do it

To perform the cleaning and lubrication called for in the flowchart, see:

• Section 6.7, ’Clean The Slow Axis Rails and Pulleys’

• Section 6.3, ’Slow Axis Bearing Lubrication’