Hardware manual

ZPrinter® 650 Hardware Manual ZPrinter 650 Overview

10/21/08

1.3 Computer/System Requirements

1.3.1 Recommended System

• Operating System: Microsoft Vista 32-bit or XP Professional

• Processor: Intel® Core™2 Duo Desktop Processor E8200 2.66Ghz or better

• Video: 512MB Video card (recommend nVidia Quadro FX1700)

• Memory: 4GB or better

• Hard Drive: 1 GB of free space

• Ethernet 10/100 Base T

These system configurations may require a higher performance computer based on file size and type. For

more information, please contact your local Reseller, or visit the support section of our Web site:

zcentral.zcorp.com.

1.4 How 3D Printing Works

The 3D Printing System is based on the Massachusetts Institute of Technology's patented 3DP™ Technol-

ogy (3D Printing). The 3D Printing process requires:

Build Volume 10” x 15” x 8” (254 mm x 381 mm x 203 mm)

1200 cubic inches build capacity

Build Speed 2-4 layers per minute

Layer Thickness .0035” - .004” (.089 - .102 mm)

Resolution 600 x 540 dpi print resolution

Noise Levels During Printing = 57dB

Emptying Overflow = 66dB

Vacuuming - Cover Open = 72dB

Fine Powder Removal = 72dB

CSA, CE Approval Meets CE certification standards and UL standards.

Power Requirements 100V, ~50-60 Hz, 15 Amp.

115V, ~50-60 Hz, 15 Amp.

230V, ~50-60 Hz, 8 Amp.

Note: Due to high amperage, a dedicated outlet is

strongly recommended.

Materials -

High Performance Composite Zp131 Powder

Zb61 Binder

Z Corp. is always evaluating new materials for use with

your printer. For the latest information check the Materials

section of our Web site:

zcentral.zcorp.com.

Print Heads 5 each HP11 (clear, black, cyan, magenta, yellow)

1520 jets total

Liquid Waste System Pull-out tray