Hardware manual

ZPrinter® 650 Hardware Manual Troubleshooting the ZPrinter 650
zcentral.zcorp.com 71 All Rights Reserved
10/21/08
7 Troubleshooting the ZPrinter 650
If you should encounter any problems with your ZPrinter 650, the steps below will help you troubleshoot
the problem and, in most cases, correct it yourself. If you need to call service, we’ve provided a list of the
information to have ready for your Service Provider.
Start Here
Start with Section 7.1, ’Try This First’. In many cases this will solve the problem.
Troubleshoot
If the problem persists, use these troubleshooting flowcharts and tables to isolate the problem.
Power Up Problems
• Section 7.2, ’Problems Powering Up’
Motion Errors
• Section 7.3, ’Print Head Errors/ Weak Parts’
• Section 7.4, ’Alignment Errors’
• Section 7.5, ’Motion Errors - Fast Axis’
• Section 7.6, ’Motion Errors - Slow Axis’
Network Errors
• Section 7.7, ’Network Errors - Cannot Connect to Printer’
• Section 7.8, ’Network Errors - Packet Timeout’
Part Quality Problems
• Section 7.9, ’Part Quality Issues - General’
• Section 7.10, ’Part Quality Issues - Streaky or Striped Parts, Delamination’
• Section 7.11, ’Part Quality Issues - Bad Surface Finish’
Other problems
• Section 7.12, ’Miscellaneous Problems’
Additional information
• Section 7.13, ’Error Codes and Messages - Background Details’
• Section 7.14, ’Additional Information’
Call for Service
If you do need to call service, use the checklist provided here to gather the information your Service Pro-
vider will need.
• Section 7.15, ’Calling for Service’