Hardware manual

ZPrinter® 650 Hardware Manual Additional Operations

10/21/08

5.3 Add Binder

If there is not enough binder in one or more of the cartridges, ZPrint displays BINDER LOW in the Printer

Status dialog.

Important: Do not add binder unless you are prompted to in the ZPrint Printer Status dialog.

To add binder, follow the steps below.

1. Pull the empty binder cartridge out of its housing on the printer.

2. Get a new binder cartridge. Check the expiration date, and check the cartridge label for the correct

color and orientation. Match the cartridge color to the color label on the printer.

3. Insert the cartridge into its housing with the color marking on top. Ensure the cartridge is pushed all the

way in. You should feel it gently snap into place.

Important: If a cartridge does not snap into place, do not force it. Check the orientation and that it is

the correct color and try again.