Hardware manual

ZPrinter® 650 Hardware Manual Routine Cleaning

10/21/08

3.2 Empty The Debris Separator

After vacuuming, empty the Debris Separator. The Debris Separator catches any large particles and keeps

those pieces from being recycled into the feeder. To empty the Debris Separator follow the steps below.

1. Pull the Debris Separator out of its holder on the printer.

2. Empty the contents into a trash receptacle.

3. Use the soft brush found in the Accessory Kit to brush any caked-on powder from the screen.

4. Return the empty Debris Separator to its holder. Be sure to push the Separator flat against the panel

for a secure fit.