Hardware manual

ZPrinter® 650 Hardware Manual Setup And Print The Build

10/21/08

ZPrint Transform Menu

Translate

Positions the selected part by the amount specified

for the X, Y, and Z coordinates. The default values of

0,0,0, represent the lower-left corner of the Build

Bed.

Rotate

Rotate/Rotate Group - Rotates the selected part in

the specified plane (view).

Select your part (left-click on the part in ZPrint) and

select Transform > Rotate. Select the plane (view)

to rotate the part in and then enter the degree of

rotation in the degrees field.

Enter a negative value to rotate the part clockwise

by that amount.

Scale

Scale/Scale Group - Scales the selected part by

the dimensions specified in the Relative or the X, Y,

and Z fields.

Select the part. Select Transform > Scale. Limit the

scale to the maximum limits of the build area -10 x

15 x 8 inches.

(254 mm x 381 mm 203mm).