Hardware manual

ZPrinter® 650 Hardware Manual Setup And Print The Build

10/21/08

3. If the Choose Units dialog opens, choose the display units that correspond to the part dimensions and

then click Next. The file is opened in a new ZPrint window using the units specified in this dialog.

4. If you would like to add additional files to the build, select File > Import and select more files. By

default, ZPrint will position each file in the Build Bed for the fastest print time.

2.5 ZPrint Main Window

See the ZPrint™ Software Manual for a complete description of the Main Window.

2.6 Check Or Change The Default Printer Settings

1. Select Settings > Printer Settings to display the Default Printer Settings dialog.

2. In the Default Printer Settings dialog, check that the default printer is the printer that is connected to

your computer.

• If it is not, click Select Printer and proceed with Step 3.

• If it is, click Cancel and skip the rest of this procedure.