User`s manual

ZPrint™ Software Manual Service Menu

11/30/09

Empty Overflow. Select to empty the overflow bin before each build.

Lube Fast Axis. Select to have the system position the gantry so the fast axis bearings can be lubri-

cated. It also moves the gantry back and forth to lubricate the entire fast axis rail. (NOTE: This feature

is only available for Z810 3D Printers with serial numbers of 80050 and up.)

Lube Slow Axis. Select to have the system position the gantry so the slow axis bearings can be lubri-

cated. It also moves the gantry, thereby spreading the grease onto the slow axis rails. (NOTE: This

feature is only available for Z810 printers with serial numbers of 80050 and up.)

Spit on Deck. Select to test the print quality of your print heads. This feature is used after changing

print heads and can also be used when your print heads have reached a high pixel count.

Report Capabilities. Select to view a report of the build size and print modes.