User`s manual

ZPrint™ Software Manual Service Menu

11/30/09

9 Service Menu

The Service Menu is where you will find everything you need to maintain and update your printer.

ZPrint communicates with the printer during routine service procedures. You can also view status informa-

tion directly at your 3D Printer, and activate several service functions, should there be a need.

The ZPrinter 350/450/650 Service Menu is described below. If you own a ZPrinter 310/Mx Plus; a Spec-

trum Z510/DESIGNmate/Cx; or a Z406 Printer, you can use the ZPrinter 350/450/650 Service Menu as a

reference. Everything on the 310 Plus/510/406 Service menus is defined below on the ZPrinter 350/450/

650 Service Menu.

Z810 Printer owners should reference Section 9.2 “Z810 Service Menu” for a description of the Z810 Ser-

vice menu.

9.1 ZPrinter 350/450/650 Service Menu

The following Service Menu is available for the ZPrinter 350, 450, 650, 310 Plus, Z510, and Z406.

NOTE: Some details of the menu will vary depending on the printer. Refer to your printer’s Hardware Man-

ual for details.

ZPrinter 450 and 650 ZPrinter 350

Service Menu items are as follows:

Unpark. Unparks the Fast Axis and carriage for cleaning or servicing.

Change Print Head. Prepares the system to change a print head.