User`s manual

ZPrint™ Software Manual Print The Build

11/30/09

• The printer will automatically fill the Build Bed with powder and spread a layer to ensure the top

surface is smooth.

• The printer will service the print heads. If you changed an HP11 print head, the printer will perform

an automatic purge on that cartridge to prepare it for binder.

• The printer will run a print head alignment before the build if the text message Will Be Performed

is shown in the Printer Status dialog. See Chapter 7 for more information.

• You can start the build while the printer is still warming up, however, the printer top cover must be

closed.

6. The Printing dialog opens and reports the build status.

6.3.1 The Printing Dialog

The Printing dialog opens after the build is started. It reports the status of the print job for the duration of

the build, including the Estimated Finish Time, Estimated Time Remaining, Starting Time, Elapsed Time,

the Layer that is currently printing, and the % completed.