User`s manual

ZPrint™ Software Manual Setup The Build

11/30/09

7. When you are satisfied with the label placement, click OK in the Label dialog. If you need to start over,

select Edit > Undo Label.

5.16 Make Solid

Make Solid is a feature that generates a solid base for a single rectangular surface. We recommend gen-

erating a solid base when printing GIS (Geographical Information Systems) files.

1. Open a .gis file in ZPrint and select the part.

2. Select Edit > Make Solid.

3. In the Base Thickness dialog, enter a value for the base thickness and press OK.