User`s manual

ZPrint™ Software Manual Setup The Build

11/30/09

• Select one or more parts in the Top or Side Views.

• Choose an option on the Transform > Rotate in Active View submenu.

5.9 Scale Parts

Select the part and choose Transform > Scale. If you scale a part and it does not fit into the Build Bed,

ZPrint prompts you with a warning telling you an object is extending beyond the Build Bed boundaries and

draws a red wire frame around the part. See Section 5.11.1 “Parts Extending Outside The Build Bed

Boundaries” for additional information.

In the Scale dialog box, you have several options:

• Scale the part as an Absolute percentage of its size when it was first brought into the build volume

by entering a percentage in the Absolute field.

• Scale the part Relative to its current size by entering a percentage in the Relative field. Click the

cursor in any of the X, Y, or Z fields to update those values. Click OK.

• Scale a part to a specific size by entering dimension values directly in the X, Y, and Z fields.