User`s manual

ZPrint™ Software Manual EZ Print For ZPrinter 310 Plus/DESIGNmate Mx

11/30/09

e. Check fluid containers

9. When all the steps to setup the printer are complete, the software will start printing your part. ZPrint

saves your .zbd file prior to printing.

10. When the print job is completed, ZPrint begins a drying cycle and starts to countdown the time before

you can remove the part from the Build Bed.

11. When the part is ready to remove, ZPrint displays the dialog shown below. This dialog contains links to

video clips about how to remove, depowder, and infiltrate a part. Remove and post-process the part.