User`s manual

ZPrint™ Software Manual EZ Print For ZPrinter 310 Plus/DESIGNmate Mx

11/30/09

8. The software will take you through several steps to prepare the printer. Complete the steps in each dia-

log that appears. If you need help, or do not understand a step, click the Picture or Video buttons.

a. Fill feed piston with powder from the overflow bin.

b. Fill feed piston with fresh powder.

If you still do not have enough powder to complete your build after recycling powder from the

overflow bin, the software will prompt you and then drop the feed piston to the level required to

complete the build. It will not drop the feed piston completely to the bottom.