User`s manual

ZPrint™ Software Manual ZPrint Main Window
zcentral.zcorp.com 12 All Rights Reserved
11/30/09
3D Print: Displays the Printer Status dia-
log (ZPrinter 450) or the Printing Options
dialog (all other Printers).
3D Print Setup: Displays the 3D Print
Setup dialog where you check or change
your Printer, Powder Type, Layer Thick-
ness, or Bleed Compensation settings for
the current build.
Cut: Select a part and use Cut to remove
the part from the view without deleting it.
Copy: Select a part and choose Copy to
copy the part.
Paste: Select Paste to place a cut or copied
part into the ZPrint main window.
Translate: Displays the Translate dialog.
Choose to move a part a specified distance
on the X-, Y-, or Z-Axis, or a combination of
the three. The default coordinate position
(0,0,0) is the lower-left corner of the Build
Bed.
Rotate: Displays the Rotate dialog. Choose
to rotate a part in the XY, XZ, or YZ planes
by a specified amount.
Scale: Displays the Scale dialog. Enter the
percentage by which to scale a part and
then choose to fit the part relative to the X-,
Y-, or Z-Axis. (The range of values you can
scale a part is between 0.0001 and 10,000.)
Mirror: Displays the Mirror dialog. Choose
to mirror a part in the X-, Y-, or Z-Axis direc-
tion.
Justify: Displays the Justify dialog.
Choose to align the part to sides of the Build
Bed by selecting options for Left
or Right,
Front or Back, or Bottom alignment.