User`s manual

ZPrint™ Software Manual Overview

11/30/09

NOTE: If you experience difficulty locating your printer through ZPrint, please contact your local

Reseller, or visit the support section of our Web site:

zcentral.zcorp.com.

1.7 Check The Default Powder Type Settings

1. In ZPrint, select Settings > Powder Settings.

•The Powder Settings dialog opens and lists each printer previously selected in the Default

Printer Type dialog.

• The default printer is bolded and expanded to show the materials available for use with the printer.

• The default powder type is also shown in BOLD and its settings populate the right side of the

Power Settings dialog.

2. Select a powder type to view its settings.

Important: Powder settings cannot be changed unless you create a custom powder type (see Section

8.1 “Create Custom Powder Types”), however, you can override the Layer Thickness, Bleed Com-

pensation, Anisotropic Scaling, and the Fixture Clearance settings for an individual build. We do

not recommend changing these, but should you need to:

•Select File > 3D Print Setup to check/uncheck the Bleed Compensation option, or to choose a

different Layer Thickness.

•Select Transform > Anisotropic Scaling to change the X, Y, and Z settings.

•Select Edit > Make Fixture to change the Fixture Clearance value.