User`s manual

ZPrint™ Software Manual Overview

11/30/09

2. The Port Type field should display Network. To select a different printer, choose Select Printer and

follow the steps below.

3. When Select 3D Printer dialog opens, choose either Serial Port or Network. The printer your com-

puter is connected to will show up as an option. Select your 3D Printer and click OK.

• If connecting to a printer on a network, click the Find button and select the printer from the Net-

work Printers drop-down list. Choose an Online printer and click OK.

NOTE: ZPrinter 350, 450 and 650 machines are accessed only through a Network connection.

4. Click OK on the Select 3D Printer dialog.

5. When the Select 3D Printer dialog closes, the Default Printer Settings dialog reopens for you to

save your settings. Click the Save As Default button.

• The printer listed in the Port Name field is saved as the default printer and the Port Type field

shows either Network or Serial.