User manual

Z Corporation Z406 System User Manual
6 Z Corporation Service [phone]/(887)88-ZCORP
1 YOUR Z406 SYSTEM
1.1 INTRODUCTION
1.1.1 OVERVIEW
This Z406 3D Color Printer Manual will speed you along the path towards quickly and
inexpensively building parts. The manual contains the following sections:
1. Introduction
. This section will give you an overview of the principles behind the Z406
System, familiarize you with the terminology we will use to describe the Z406 System
and introduce you to some of the features of this manual. This section concludes with an
outline of the three quick and easy steps to printing parts.
2. Preparing the Z406 System to Print.
This section will guide you through putting
powder, binder solution and washer fluid in the Z406 3D Printer, and preparing the
system to print a part.
3. Setting Up The Build.
This section gives you a brief overview of how to set up a build on
the ZPrint Software. For more information about the softwre and its features, please refer
to the ZPrint User Manual.
4. Printing the Part.
This section describes the steps of actually printing the part.
5. Post Processing a Part.
This section guides you through removing your printed part,
removing any excess powder and infiltrating the part with resin to improve strength and
finish.
6. Advanced User Features.
This section will help you get the maximum performance out
of your Z406 System.
7. Maintenance.
This section contains instructions for keeping your Z406 3D Printer in
proper condition through regular preventative maintenance.
8. Troubleshooting.
This section offers some troubleshooting tips.
9. Z406 System Details
. This section contains system specifications about the Z406 3D
Printer.
10. Index.