User manual

Z406 System User Manual Z Corporation
www.zcorp-users.com 35
8. To remove the print head, lift the blue
handle and pull up gently. Repeat for all
four print heads.
PLEASE NOTE: All print heads should
be changed at the same time to ensure
proper print head logging.
9. Before inserting new print head, clean the
contacts with an alcohol crush swab (Z
Corp. part number 12073.)
10. Remove the print head from the
packaging. After removing plastic
covering from print heads contacts, clean
the contacts with the alcohol swab
provided. Let alcohol dry before inserting
print head into carriage.
11. Insert the new print head and push down
firmly on top to make sure print heads is
seated properly in the carriage. Close and
latch the printhead clamp. Push head
release lever forward towards you.
12. Close the carriage cover and press the
‘Online’ button once. Once the machine
has come back on line, press the ‘Done’
button on the software dialog box. The
print heads will now need to be aligned.