User manual

Z406 System User Manual Z Corporation
www.zcorp-users.com
23
3 SETTING UP THE BUILD
This chapter will briefly explain how to set up the build, check the 3D Print Settings, and print. For more
information about the features in the ZPrint Software, please refer to the ZPrint User Manual.
PLEASE NOTE: If the ZPrint Software has not been installed, install the software. Instructions are
located in Section 1.1 of the ZPrint User Manual.
3.1 OPEN OR IMPORT THE FILE
1. Open the ZPrint Software. The open
dialog box will appear.
2. Choose the file you wish to open.
3. Click ‘Open’ or double-click the file.
4. Choose the dimensions and powder type
you will be using.
5. Click ‘OK’.
6. The file will be brought into the software
and sliced.
If you would like to open additional files,
choose the ‘Import’ option under the File menu.