User manual

Z406 System User Manual Z Corporation
www.zcorp-users.com
19
To clean the Service Station:
1. Move the gantry to the left of the top deck
by pressing the ‘Spread’ button.
2. Lift the Top Cover.
3. Manually lift up the metal plate covering
the service station.
4. Squirt distilled water onto the squeegee
and wipe clean with the small brush
provided with your Z406 3D Printer until
all debris is removed.
5. Squirt the distilled water onto the parking
cups and wipe clean with the small brush
until all debris is removed.
6. Use a paper towel to soak up any
standing water in the parking caps.