Owner`s manual

• Warn if entity is outside the build box.
If your part is outside the build area, the boundary surrounding the part will be red. The
software will also show a dialog box reminding you that your part is outside the printable
area. You may choose not to receive the warning by turning off this feature.
1.5 Z CORP. SYSTEM SOFTWARE MAIN WINDOW
Top View
Cross-Sectional View
Front View
Task Bar
Layer Count
Height from
base of
Build Box
Figure 1: The Main System Software Window
The System Software provides three views of the build in the Main Window.
• The top view presents the view of the build in the x-y plane from the top.
• The front view presents the view of the build in the x-z plane from the front of the build
area. The horizontal yellow line marks the cross-section being displayed in the cross-
sectional view.
• The cross-sectional view displays the layers that the 3D Printer will print.
The window views can be resized for user convenience. To resize a window, place the curser
over the border between views, left-click on the border and drag to create your preferred window
size.
[e-mail]
8