Owner`s manual

3.6 LOGGING FILES
In addition to communicating with the Printer, the System Software also records print information from
the Printer.
When the option to log files is checked off at the start of the build, the System Software will log
information regarding each build. The log files can be found in the directory “C:\ZCorp Printer
Records\Print Logs”. They are tab-delimited files for easy import into a spreadsheet. When the print
heads are changed, the line ” Print head changed!” is inserted. If this file becomes too large, either
delete it or rename it; the software will automatically start a new one. There is also an html file letting
you know the status of your build. This file can be accessed through the network by sharing this Print
Logs folder. To share this folder, right click on the folder, select properties and select the ‘Sharing’
tab. Choose to share the folder.
Below is a description of the data found in the log file.
Build Date: The desktop computer’s date when the build was started.
Time: Time to complete printing in minutes.
Job Pixels: Total number of pixels fired during the job (sum of all print heads).
Note: pixels are not logged for print head purging between jobs.
Fed: Approximately how much binder was fed during the job, in milliliters.
Prime Does not apply to the Z406 or Z810 Systems, only the Z400, Z402, and Z402C Systems.
Dsize Does not apply to the Z406 or Z810 Systems, only the Z400, Z402, and Z402C Systems.
DSDEV Does not apply to the Z406 or Z810 Systems, only the Z400, Z402, and Z402C Systems.
Error If the job was terminated with an error code, it will be recorded here.
Max The maximum head temperature during the build.
Min The minimum head temperature during the build
Pre Does not apply to the Z406 or Z810 Systems, only the Z400, Z402, and Z402C Systems.
Vol Part volume
Area Total printed area
Shell Shell saturation
Core Core saturation
Thickness Layer thickness
Name File name for the job
Version Software Version
Powder Type Powder System
Color Mode Color or Monochrome Mode
BleedComp Bleed Compensation On or Off
Estimated Time Estimated print time for build
Estimated Pixels Estimated pixel usage for build
Head Report The accumulated number of pixels printed per print head.
[e-mail]
30