Owner`s manual

Z Corp. System Software
www.zcorp-users.com
3.5 PRINT TIME DELAYER
The System Software also allows you to print your build at a later time. In instances where the set up
time in the build area is specific (as in the case of starch builds), you may choose to use the print time
delayer option in order to have the part finish at a certain time. For instance, if you would like to print
a five-hour starch part to finish at 8:00 AM, you would use the print time delayer to begin printing the
part beginning at 3:00 AM. Using the print time delayer option prevents parts from sitting in the build
area for too long. This option can be enabled before printing in the 3D Print Options dialog box.
You will then be asked to input how many hours and/or minutes to delay your build. You may also
choose to use the arrows to increase or decrease values. The estimated finish time will change as
you input values for the hours and minutes.
29