Owner`s manual

In addition to the basic Service menu, each of the Z406 and Z810 Printers have
specific service menus.
3.2 Z406 SYSTEM SERVICE MENU
When connected to a Z406 3D Printer, the 406Service menu will be an
option.
• Purge Print Heads. Use this feature after changing the print heads and printing the
alignment test. This runs binder through the print head, replacing the HP ink with binder
as described in the User Manual.
• Alignment. This feature is used to align the print heads after changing them as described
in detail in the User Manual.
• Color Alignment. This feature is used to align the color print heads after the standard
alignment as described in detail in the User Manual.
• Change Binder Supply. This feature allows you to change between color and
monochrome binder systems.
• Unpark. This feature allows you to unpark the carriage to allow for cleaning the Service
Station.
• Bleed Air. This function allows you to remove air from the fluid system. This feature is
only used when air has entered your fluid system due to binder shortage when printing.
Use this feature only with the guidance of the Z Corporation Service Department or
authorized Z Corporation service provider.
• Print Head Report. This feature allows you to view the number of pixels printed,
temperature levels, and flow rates of the current print heads.
• View Log. This feature allows you to view the printer log, which records historical printer
performance.
• Edit .INI File, Send File and Receive File. These features are used during diagnosis.
They should be used under the instruction of the Z Corporation Service Department or
authorized Service representative.
[e-mail]
26