Owner`s manual

2.6 SAVING YOUR WORK
After you have imported the files, oriented the parts and set up your build to print, save your work
by selecting ‘Save As’ from the File menu. After you choose a name for your build, select ‘Save’
and your work will be saved as a *.zbd file. A build file contains all of the modifications that you
have made to the parts and the settings you have selected for the build.
If you reopen and work on an existing build file, you can save your changes to the *.zbd file by
either selecting ‘Save’ from the File menu or choosing the save icon from the tool bar.
2.7 EXPORTING PLY
The System Software allows you to export your model from the build if needed so that you may
alter your part. To export a part, choose the part. Then choose the ‘Export PLY’ option under the
File menu.
[e-mail]
24