Owner`s manual

Z Corp. System Software
2.3.6 MIRROR PARTS
• Mirroring a part or group of parts allows you
to inverse the orientation of the part features
in the x, y, or z axis. The software does this
by placing a plane in the center of the part in
the x, y, and z axis. When you choose to
mirror a part in a certain axis, the software
will invert the part within that axis.
Copy and
Mirrored Hand in
the X-Axis
Original File
• To mirror a part, select the part and
select “Mirror” from the Transform
menu. The software will not create a
separate part. It will take the part
selected and invert the orientation for
this part.
• You may also mirror a group of parts
by selecting the parts, and choosing
‘Mirror Group’.
2.3.7 SCALE PARTS
• To scale the part, select the part and choose
‘Scale’ from the Transform menu. In the
dialog box, you are given several options.
You may scale the object relative to the
dimensions in the imported file and the units
you initially selected by entering a
percentage in the ‘Relative’ box. Remember
to limit your selection to the maximum limits
of the build area.
• You may also scale a group of parts by
selecting the parts, and choosing ‘Scale
Group’. Only the relative option is available
when scaling a group of parts.
2.3.8 JUSTIFY PARTS
• To justify the part, select the part and
choose ‘Justify’ from the Transform menu.
You may justify the part to the center, left,
right, front, back or bottom of the build box.
Justifying the part lets the software move the
part to the edge of the print area optimizing
your build area.
• You may also choose to justify a group of
parts.
www.zcorp-users.com
17