Owner`s manual

Z Corp. System Software

• To enable bleed compensation before

printing, click on the bleed compensation

option, located in the Printing Options dialog

box.

• The software allows you to transform the part

individually or as a group. When transformed

individually, the center of transformation is

located in the middle of the part. When

transformed as a group, the center of

transformation is located in the middle of the

group.

• The group function is useful if you would like

to keep a group of parts oriented relative to

each other.

Here is an illustration to help clarify the

differences between individual and group

transformations.

In the picture to the left, there are two parts in the

print area.

If both parts are selected and the ‘Rotate’ option

is chosen, the parts will rotate and re-orient

themselves relative to their individual centers, as

can be seen in the picture.

PLEASE NOTE: The Bleed Compensation

option will remain enabled until you

disable it by unclicking the Bleed

Compensation option.