User manual

Z Corporation Z406 System User Manual
96 Z Corporation Service [phone]/(877)88-ZCORP
12. Change printer mode from color to
monochrome or monochrome to color if
needed.
13. If you changed binder solution, flush
binder for two minutes by choosing the
‘Flush Binder’ option under the Service
menu.
14. Then purge the print heads.
15. For ZCast Powder users, remove
scraper assembly if you are changing
over to ZCast powder. Or reattach
scraper assembly if using plaster or
starch material. Use the 3/32 Allen
wrench tool that accompanied the
Z406 ZCast Kit.