User manual

Z406 System User Manual Z Corporation
www.zcorp-users.com
81
14. Unpark the gantry to expose the
service station.
15. Clean the service station of any HP
ink residue as described in Section
2.2.2, Cleaning the Service Station.
Clean the deck and fast axis rails. Oil
the fast axis rails.
Technical Tips –
The first 50 layers of your part will have
a tint of black HP ink. You may place a
flat brick, such as the 406purge.stl,
under Samples\Test Parts, under your
part to purge all black ink before printing
your part.