User manual

Z Corporation Z406 System User Manual
80 Z Corporation Service [phone]/(877)88-ZCORP
10. Remove the paper off the plate
carefully. If you would like to save the
sheet, remove the top edge of the
paper, adhere it to a blank sheet of
paper, and pull the blank sheet of
paper slowly.
11. Repeat steps 2-10 on a clean sheet
of alignment paper until all alignment
reticles line up at 0.
12. Look at target drawings to confirm alignment of print heads.
All bull's eyes are centered.
All targets are
evenly spaced.
13. Purge print heads after the alignment
process. This will clear print heads of
black ink and fill them with binder.
The process should take about 10
minutes. The LCD will display
‘Online’ when the printer has
completed the purge process.
Technical Tip –
If you need to work in another dialogue box, click the close window button (X located on the
upper right-hand corner), NOT THE DONE OR CANCEL button. You may continue purging.
Complete the procedure by pressing the ‘Online’ button on the printer when complete.