User manual

Z406 System User Manual Z Corporation
www.zcorp-users.com
77
5. Click on ‘Print Test Pattern’ in the alignment dialog
box. It will take a minute to initialize the printer, send
the pattern, and print.
6. For each print head to be aligned, there are two numbers to be chosen. To do this, look at the alignment
pattern and decide which pattern looks best.
In this pattern, a properly aligned set has four longer lines with three shorter lines centered between them.
Print head 0 is the reference, print heads 1 through 3 are aligned to print head 0. Each row is labeled at the
left, F1 and S1 correspond to Fast1 and Slow1 on the dialog box and following.