User manual

Z406 System User Manual Z Corporation
www.zcorp-users.com
75
5. To remove the print head, lift the blue
handle and pull up gently. Repeat for all
four print heads.
PLEASE NOTE: All print heads should
be changed at the same time to ensure
proper print head alignment.
6. Remove the print head from the
packaging. Remove plastic covering from
print head contacts.
7. Insert the new print head and push down
firmly on top to make sure print heads is
seated properly in the carriage.
8. Close the carriage cover. Then press the
‘Online’ button once or press the ‘Done’
button on the software dialog box. The
print heads will now need to be aligned.