User manual

Z406 System User Manual Z Corporation
www.zcorp-users.com
29
3 USING ZPRINT SOFTWARE
This chapter will briefly explain how to set up the build, check the settings, and print. For more
information about the features in the ZPrint Software, please refer to the ZPrint Software User
Manual.
PLEASE NOTE: If the ZPrint Software has not been installed, install the software. Instructions are
located in Section 1.2 of the ZPrint Software User Manual.
3.1 OPEN OR IMPORT THE FILE
1. Open the ZPrint Software. The open
dialog box will appear.
2. Choose the file you wish to open.
3. Click ‘Open’ or double-click the file.
4. Choose the dimensions and powder
type you will be using.
5. Click ‘OK’.
6. The file will be brought into the
software in a new window.
If you would like to add additional files
to this build, choose the ‘Import’ option
under the File menu.