User manual

Z Corporation Z406 System User Manual
28 Z Corporation Service [phone]/(877)88-ZCORP
2.2.5 PUTTING THE MACHINE ONLINE
Press the ‘Online’ button. The green ‘Online’ indicator light will illuminate. The Z406 3D Printer is
now ready to print.
Technical Tip -
¾ Keep the machine clean!
¾ Make sure that you have enough powder to complete the build. It is wise to always begin a build with a
full feed box.
¾ CHECK THE OVERFLOW BIN! If the overflow bin becomes full, powder will back up through the
system and cause errors with your printer.
¾ CHECK FLUID LEVELS! Make sure you have enough fluid to complete the build. Make sure the waste
bottle is empty.
¾ Keep your Z406 3D Printer as clean as possible. The cleaner it is, the better it will function.
¾ Carefully read the Material Safety Data Sheet for binder and wash fluid before use.