User manual

Z406 System User Manual Z Corporation
www.zcorp-users.com
109
10.9 COMMUNICATION ERRORS BETWEEN PRINT HEAD AND PRINTER
In general, there is no need to clean the pogo pins upon replacing the print heads. At times, they
may need to be cleaned due to errors in communication between the print head and printer (such
as when receiving Head ROM errors) or when it is dirty.
To clean the pogo pins, follow the instructions below:
1. Use the alcohol swabs which can
be ordered from Z Corporation
(part number 12073).
2. Remove the alcohol swab from the
packaging.
3. Crush the plastic casing to release
alcohol into the swab.
4. Open the carriage cover.
5. Wipe the pogo pins.
6. Close the carriage cover.