User manual

Z Corporation Z406 System User Manual
108 Z Corporation Service [phone]/(877)88-ZCORP
10.8 AIR ENTERED THE FLUID LINES
When removing binder by disconnecting airlines from binder bottles or if binder runs out
while printing air may enter the fluid lines. Air in the fluid lines will result in the early print
head mortality. To remove air from the fluid lines follow the following instructions:
1. Select the ‘Bleed Air’ function under
the 406Service menu.
2. Insert the syringe into the septum
and let the syringe fill until there are
no more air bubbles.
Septum
Syringe
3. Remove syringe and place on a
paper towel to prevent binder from
dripping.
4. Empty the syringe.