User manual

Spectrum Z510 User Manual
63 www.zcorp-users.com
INDEX
3D Print, 30
Accuracy, 7
Air in Fluid Lines, 54
Air in Wash Fluid Line, 55
Alcohol Swabs, 56
Alignment Window, 24
Auto Alignment, 25
Bleed Air, 47, 51, 54
Build
Open File, 28
Build Settings
3D Print Setup, 29
Override, 29
Change Print Heads, 23
Clean Pogo Pins, 56
Clean Roller, 48
Collision Detection, 29
Control Panel, 9
Error Codes, 62
External Components, 9
File
Import, 28
Open, 28
Fill Bed, 20
Fill Feed Piston, 19
Firmware Settings, 59
Fluid Levels, 22
Fluid Lines
Air, 54
Fluid Lines Clean Out, 51
Grease Piston Screws, 46
Import File, 28
Infiltrants
Wax, 37
Z-Bond Cyanoacrylate, 38
Z-Max Epoxy, 39
Internal Components, 10
Maintenance
Change print heads, 23
Clean Roller, 48
Fluid lines with distilled water, 51
Grease Piston Screws, 46
Massachusetts Institute of Technology, 6
Material Storage, 58
NetworkSettings, 59
Open File, 28
Parking Caps, 21
Part Orientation
Circular Features, 28
Hollow Area, 28
Opening, 28
Overhangs, 28
Part Placement, 7
Part Removal, 33, 35
Parts
Crumbly, 54
Warping, 53
Weak, 54
Piston Screws, 46
Pogo Pins, 56
Post Processing, 31
Tools, 31
Preheating, 18
Prime Wash Line, 55
Print Heads
Change, 23
Printer Assembly, 10
Printer Error
Communication Error - Print Head and
Printer, 56
Printing Problems, 53
Printing Process, 6
Printing the Build, 30
Removing Part, 33
Rubber Wiper Blade, 21
Service Station, 11, 12
Clean, 20
Shelling, 7
Spit Cover, 21
Strength, 7
Striping of Binder Solution, 53
System Components, 8
System Details, 57
Tamp powder, 19
Tools
Post Processing, 31
Wax, 37
Z-Bond, 37
Z-Max, 37
ZPrint Software
Collision Detection, 29
Install, 27
Printing, 30