User manual

Spectrum Z510 User Manual
57 www.zcorp-users.com
8 Spectrum System Details
8.1 System Specifications
Dedicated power outlet requirements 100-120 VAC
50-60Hz, 15A max -or-
220-240 VAC
50/60Hz, 7A max
Network Ethernet 10/100 base T
Temperature 68-85° F. (20-30° C)
Relative Humidity 20-60%, non-condensed
Weight 470 lbs. (210 kg)
Spectrum Z510 Dimensions Cover Closed
42” x 31.25” x 50.5” (107cm x 79cm x 128cm)
Cover Open
42” x 31.25” x 73” (107cm x 79cm x 185cm)
Lithium Battery: Internal to the SPECTRUM 3D Printer is a lithium coin cell type battery.
This may be any one of the following: Type: CR2032, either Maxell, Panasonic, Renata,
Sanyo or Sony. PLEASE NOTE: This battery is not
in a user accessible area and is not
user replaceable. The expected lifetime of the battery is in excess of five years.
Replacement will be handled by your Z Corporation customer service representative.
FCC Notice: Note: this equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interferance to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
CENELEC Class A Warning: Note: this equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to EN 55022. Class A devices are
for office and light industrial environments, and are not generally suitable for home use.
WARNING: This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.