User manual

Spectrum Z510 User Manual

www.zcorp-users.com

4. The progress bar will close when

priming is completed.

7.9 Communication Errors Between Print Head and Printer

In general, there is no need to clean the pogo pins upon replacing the print heads. At

times, they may need to be cleaned due to errors in communication between the print

head and printer (such as when receiving Print Head errors) or when it is dirty. To clean

the pogo pins, follow the instructions below:

1. Use the alcohol swabs which can

be ordered from Z Corporation

(part number 12073).

2. Remove the alcohol swab from the

packaging. And crush the plastic

casing to release alcohol into the

swab.

3. Unpark the gantry and move

gantry manually towards the front

of the printer..

4. Open the carriage cover and

remove print head.

5. Wipe the pogo pins and reinsert

print head.

6. Close the carriage cover and

repark gantry.