User manual

Spectrum Z510 User Manual
51 www.zcorp-users.com
6.19 Replace Fluid Lines with Distilled Water
If the printer will not be in use for more than two weeks, replacing all the fluid lines with distilled
water will prevent binder from coagulating in the fluid lines.
1. Remove binder from bottle and
place in an airtight container.
2. Rinse out binder bottle.
3. Fill binder bottle half way full
with distilled water.
4. Select ‘Bleed Air’ under the
Service menu.
5. Open carriage cover and remove print
heads.
6. Use syringe (found in toolbox) to draw
water through each fluid line. Draw fluid
through each line until it is clear
(minimum of 50 cc).