User manual

Spectrum Z510 User Manual
www.zcorp-users.com
48
6.10 Service Print Heads
‘Service Print Heads’ will initiate a standard service on the print heads.
6.11 Prime Wash Line
‘Prime Wash Line’ will remove any air from the wash fluid pumping system. This should be
performed upon initial machine setup and any time the wash fluid is allowed to run dry.
6.12 Stripe Test
Authorized Z CORPORATION service personnel use ‘Strip Test’ to aid in troubleshooting.
6.13 Cleaning the Spreader Roller / Toggle Roller
1. Open top cover.
2. Remove all powder from build
envelope.
3. Lower the
top cover
and put the
printer
offline.
4. Lower build
piston all the
way down.