User manual

Spectrum Z510 User Manual
35 www.zcorp-users.com
8. Place a tray on the top of the feed
area. Remove the build plate and
place on the tray. The part is now
ready to be fine depowdered.
WARNING: When performing any vacuuming operation, use the vacuum provided as
part of the Spectrum System. Vacuuming powder can generate static electricity, and
use of a non-grounded vacuum will create static charges, which may affect the
operation of the Spectrum System and harm the operator.
5.4 Depowdering the Part
1. Place parts inside depowdering
station.
2. Turn on vacuum cleaner.