User manual

Spectrum Z510 User Manual
www.zcorp-users.com
30
4.5 Printing the Build
It is strongly recommended that the build
settings be confirmed before printing. To
check build settings, choose ‘3D Print Setup’
under the File menu or click on the icon
located on the taskbar.
After all build settings have been confirmed:
1. Choose ‘3D Print’ under the File menu.
2. A dialog box will appear asking that
powder and fluid levels be checked.
3. Check off the boxes to confirm that these
have been inspected before beginning
the build.
Once the build has begun, a dialog box
will appear reporting the status of the
build.