User manual

Spectrum Z510 User Manual
23 www.zcorp-users.com
4. Check binder bottles. The Spectrum
Z510 is not equipped with binder
level sensors. The user must check
the binder levels prior to each build
to ensure the Spectrum Z510 has
enough to complete the build. View
the binder levels through the cutout
windows in the binder bottle cover
on the top cover. If it is half full, fill
binder bottles.
PLEASE NOTE: When printing in
monochrome is it still necessary to
have binder in the color bottles for
servicing.
WARNING: If this is the first time you have added binder or the binder bottle on the
Spectrum Z510 has run dry you must “Bleed Air”. Please refer to Section 6.9, Bleed Air.
3.4 Change Print Heads
1. Determine which print head
needs to be changed. This
can be done either by an error
during printing or by reviewing
the Print Head Report located
under the Service menu.
2. The printer
needs to be
‘Online’ before
changing a print
head.
3. Select ‘Change Print Head…’
under the Service menu.