User manual

Spectrum Z510 User Manual
www.zcorp-users.com
22
3.3 Checking Fluid Levels
1. Open front cabinet tray.
2. Check wash fluid level. If it is less
than half full, refill wash fluid bottle.
3. Check waste fluid. If it is half full,
empty fluid. Empty contents in
accordance to local or company
safety regulations. Close front
cabinet tray.
WARNING: Do not recycle waste
solution. The waste is contaminated
with powder and use of this waste in
the Spectrum 3D Printer will clog the
fluid system. Use only binder and
wash fluid supplied by Z Corporation.
Use of any other material may impact
the performance and safety of your
Spectrum System and will void the
warranty.